Is a 60 TPH Asphalt Plant Sufficient for Daily Paving of 700 Meters of Single-Lane Rural Road?

When planning a rural road project, especially in remote areas, choosing the right asphalt mixing plant can make or break the schedule. One common question we often hear is: can a 60 TPH asphalt plant meet the daily production needs for paving about 700 meters of single-lane road? In this post, we’ll break down the math, consider field realities, and help you assess if a 60-ton-per-hour amp asphalt mixing plant is the right choice for your rural infrastructure project.

Understanding the Asphalt Requirement for Rural Road Paving

Before diving into plant capacity, let’s calculate how much asphalt is actually needed to pave 700 meters of a single-lane road. A typical rural road is around 3 to 3.5 meters wide, and the asphalt layer is usually 5 to 7 cm thick.

Daily Asphalt Volume Estimation

Let’s assume:

• Lane width: 3 meters

• Length: 700 meters

• Asphalt thickness: 0.06 meters

Total asphalt volume = 700 x 3 x 0.06 = 126 m³. Given that 1 m³ of compacted asphalt weighs around 2.4 tons, the daily asphalt demand is approximately:

126 x 2.4 = 302.4 tons per day

This volume sets the baseline for choosing your asphalt plant capacity.

Can a 60 TPH Asphalt Plant Meet the Demand?

Now, let’s evaluate a 60 TPH (tons per hour) amp hotmix under real working conditions. While 60 TPH means the plant can theoretically produce 60 tons of hot mix asphalt per hour, we need to factor in realistic site operations.

Working Hours vs. Actual Output

Most rural road sites operate 8 to 10 hours per day. Even if the plant works efficiently for 8 hours:

60 TPH x 8 hours = 480 tons/day

This means the plant could technically exceed the required 302.4 tons. However, actual productivity depends on many factors—such as weather, mix design, downtime, and logistics.

Other Key Factors That Influence Productivity

While the math shows it’s sufficient, daily paving success doesn’t rely on plant output alone. Several practical aspects influence real-world productivity.

1. Transportation Distance

If your project site is far from the asphalt plant, truck turnaround time increases. You may need more trucks to maintain continuous supply.

2. Type of Asphalt Mix

Dense-graded asphalt for rural roads may take more time to mix or compact. The plant should be stable enough to produce consistent quality mixes without temperature loss.

3. Equipment Coordination

The paver, rollers, and trucking fleet must work in sync with the asphalt plant. If one link slows down, the whole process stalls. Efficient coordination is critical.

When a 60 TPH Plant Is an Ideal Choice

In many rural road projects—especially those with moderate paving targets and limited access—60 TPH plants strike a balance between cost, mobility, and performance. Here’s when it’s an ideal fit:

• You are paving ≤700 meters per day with a single-lane width

• You have a small to mid-sized crew and good road access

• The site is within 10–20 km of the plant location

• You want to manage costs while keeping decent output

If these match your situation, then yes—a 60 TPH asphalt plant is sufficient and economical.

When to Consider a Higher-Capacity Plant

If your daily paving target increases to 1 km or more, or if you’re paving double-lane roads, the daily asphalt requirement quickly exceeds 500–600 tons. In that case, upgrading to an 80–120 TPH asphalt plant might ensure more consistent supply and faster progress.

Choosing the Right Plant: Stationary vs. Mobile

Besides capacity, mobility also matters. For rural areas, asphalt mixing plant mobile can offer faster setup, easier relocation, and lower logistics costs. If your projects shift frequently between districts or islands, mobile options might be more practical than stationary plants.

Conclusion: Match Your Plant to the Project Scope

To answer the main question—yes, a 60 TPH asphalt plant is sufficient for daily paving of 700 meters of single-lane rural road, provided the logistics and crew coordination are in place. It offers a cost-effective, reliable solution for many rural infrastructure needs.

Looking for a Reliable 60 TPH Asphalt Plant?

At AIMIX, we provide well-engineered 60 TPH asphalt mixing plants tailored for rural road construction in Southeast Asia, including Indonesia. With fast delivery, expert installation, and local after-sales support, our plants help you stay on schedule and within budget.

Contact us today to get a quote or discuss your project needs. Let’s build better roads together.